Send Message
Up to 5 files, each 10M size is supported. OK
Jiangxi Zhongtian Intelligent Equipment Co., Ltd. contact@ztmchina.com
News Get a Quote
Home - News - What should be paid attention to when operating single and double beam gantry cranes

What should be paid attention to when operating single and double beam gantry cranes

November 13, 2021

Due to the influence of factors such as the processing, assembly and adjustment of new machine parts, the friction surface is rough, the contact area of the mating surface is small, and the surface pressure is uneven. During the operation of the machine, the uneven parts on the surface of the parts fit and rub each other, and the metal scraps that fall off are used as abrasives to continue to participate in the friction, which accelerates the wear of the mating surface of the parts. Therefore, during the running-in period, it is easy to cause the wear of the parts (especially the mating surface), and the wear rate is fast. At this time, if overloaded work, it may lead to damage, resulting in early failure.

 

In short, the maintenance requirements of the crane during the running-in period can be summarized as: strengthening training, reducing load, paying attention to inspection, and strengthening lubrication. As long as you pay attention to and implement the maintenance and maintenance of the crane during the running-in period as required, it will reduce the occurrence of early failures, prolong the service life, improve the operating efficiency, and make the machine bring you more benefits.